服务热线: 0755-23041829
24小时服务热线:13728820835
当前位置:网站首页 » 产品展示 » 福斯齿轮油 » RENOLIN CKC 460

RENOLIN CKC 460

福斯润滑油

RENOLIN CKC

High Performance CKC Gear Oils

High Performance CKC Gear Oils

Gearboxes designed for the transfer of power or torque can only perform effectively when excessive wear which can occur at high or fluctuating loads, particularly around the reference circle, is avoided. The life of a gearbox depends on the correct selection of the most suitable lubricating oil. The principal function of a gear oil is not just to lubricate bearings and the gears themselves, i.e. to reduce friction and avoid wear but also to provide protection against corrosion, to cool and to seal. The RENOLIN CKC gear oils contain carefully selected base oils and matched additives to protect machinery from undue wear in especially critical boundary friction conditions. RENOLIN CKC products can be classified as CKC lubricating oils according to ISO 6743-6.

The special characteristics of RENOLIN CKC series lubricants are:

  • High pressure absorption and excellent wear protection 
  • Good viscosity-temperature behaviour and excellent low-temperature characteristics 
  • Good corrosion protection for steel and nonferrous metals 
  • Good resistance to ageing 
  • Good compatibility with sealing materials 
  • Low foaming 
  • Avoidance of frictional vibration by the use of surface-active additives 
  • Good demulsification characteristics 
  • Multipurpose applications


Application:

RENOLIN CKC series oils are recommended for all industrial applications where the machinery manufacturer recommends the use of a CKC type oil. Highly-stressed bearings, joints, pressure spindles, spur and worm drive gears are reliably, effectively and economically lubricated at temperatures of up to 120°C. The use of these oils guarantees the quiet and smooth running of machinery along with optimum operational reliability. The use of these oils also allows drain intervals to be extended. Please consult our Application Engineers for suggestions on how this series of oils can be used to rationalize oil stocks.

美孚齿轮油

 

 

 

 

 

 

 

 

 

美孚齿轮油系列、美孚冷冻机油系列,美孚液压油系列等产品



 

RENOLIN CKC   100 150 220 320 460 680  
Lubricating oil type                
acc. to ISO 6743-6   CKC 100 CKC 150 CKC 220 CKC 320 CKC 460 CKC 680  
acc. to DIN 51 502   CLP 100 CLP 150 CLP 220 CLP 320 CLP 460 CLP 680  
Characteristics Unit             Test method
Colour   2 3 4 4.5 5 5 ASTM D 1500
Kinematic viscosity                
at 40 °C mm²/s 94.4 145.6 214 331 468 690 ASTM D 445
at 100 °C mm²/s 11.1 14.5 18.5 24.6 30.8 36.8 ASTM D 445
Viscosity index   102 98 96 96 95 87 ASTM D 2270
Density at 15 °C kg/l 0.884 0.89 0.895 0.9 0.903 0.922 ASTM D 1298
Flash point, Cleveland open cup °C 220 225 230 230 240 245 ASTM D 92
Pour point °C – 27 - 24 - 21 - 15 – 12 – 12 ASTM D 97
Neutralization number mg KOH/g 0.33 0.33 0.33 0.33 0.33 0.33 ASTM D 974
Saponification number mg KOH/g 1.3 0.84 0.84 0.84 0.84 0.84 ASTM D 94
Sulphate ash % mass 0.1 0.1 0.1 0.1 0.1 0.1 ASTM D 874
Water content % mass not traceable not traceable not traceable not traceable not traceable not traceable ASTM D 95
Insolubles % mass not traceable not traceable not traceable not traceable not traceable not traceable DIN 51 592
Demulsification min < 20 < 20 < 20 < 20 < 20 < 20 DIN 51 599
Foaming,                
seq. I ml < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 ASTM D 892 seq. I-III
seq. II ml < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 ASTM D 892 seq. I-III
seq. III ml < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 < 10/0 ASTM D 892 seq. I-III
Copper corrosion degree of corr. 1a-100A3 1a-100A3 1a-100A3 1a-100A3 1a-100A3 1a-100A3 ASTM D 130
Rust prevention   pass B pass B pass B pass B pass B pass B ASTM D 665
Ageing behavior,                
viscosity increase % 1 1 1 1 1 1 ASTM D 2893
precipitation number increase ml < 0.05 < 0.05 < 0.05 < 0.05 < 0.05 < 0.05 ASTM D 2893
FZG mechanical gear rig test load stage 12 12 12 12 12 12 DIN 51 354-2
Effect on SRE-NBR 1 seal material acc to DIN 53 538-1 at 100 °C +/– 1 °C after 7 days +/– 2 hours,                
relative volume change % 7 7 7 7 7 7 DIN 53 521 together with DIN 53 505
change in Shore A hardness Shore - 3 - 3 - 3 - 3 - 3 - 3 DIN 53 521 together with DIN 53 505



上一产品: 福斯 RENOLIN CLP 高极压工业齿轮油-系列
下一产品: RENOLIN CKC 100
友情链接:百度 
版权所有:深圳市森美润贸易有限公司 网址:http://www.smrrhy.com 邮箱:2663167797@qq.com 粤ICP备16090078号
地址:深圳市宝安区龙华镇民治南方明珠沙吓工业园  电话:0755-23041829 传真:0755-23050605 联系人:夏先生(业务经理) 手机:13728820835 
网站相关资质认证